-
Popular Dish Network Remotes
-
Dish Network Remote Control Codes
-
Dish Network Remote Control Programming
-
Platinum Remote for the Dish DVR 501/508
-
Platinum Plus Remote Control for the Dish DVR 721)
-
1.5 Blue Button Remote Control for the 301/311
-
3.0 - 3.1 - 3.2 - 4.0 Remote Control
-
5.0-6.0-8.0 Remote Control for the DISH 811, DISH Player-DVR 522 and DISH Player-DVR 921
-
100/200 Remote Control for the DishPlayer
-
EZ Remote Control
-
6.2 Replacement Remote Control
-
IR-to-UHF Pro Upgrade Kit
-
Turn ON the device you want the remote to control, using the device’s buttons or the remote control that came with the device.
-
Find the brand name of the device in the tables below. If the brand is not listed, see Doing the Device Code Scan.
-
Press and hold the mode button for the device that you want the remote to control, for about three seconds. When all the other mode button backlights come on, release the mode button.
-
Use the number buttons to enter the code for the device.
-
Press and release the Pound (#) button. If the code is valid, the mode button backlight blinks three times.
-
Test if the code works for the device by pressing the Power button. If the code works, the device should turn OFF.
-
Turn the device back ON and try some other buttons to make sure they work. Sometimes, the Power button may work when other buttons do not. If the code works for other buttons, stop here.
-
If the code you entered does not work, repeat steps 3 through 7 using another code from the tables.
-
If you have tried all of the codes listed for the device without success, or if you cannot find the device brand name in the tables, see Device Code Scan.